TABLE OF CONTENTS PAGE FOR DEALERS
WRIGHT MOWERS
GEAR DRIVE WALK-BEHIND
Pistol Grip Control
Cutting widths: 32", 36", 48"
Fixed Deck: Mowing height 1.5" - 4.25"
Deck Construction: 7 Gauge Steel
Blade Tip Speed: (at 3584 engine rpms) 19,000 feet/minute
Spindles: Cast Iron with 1" shaft and sealed bearings
Blade Clutch/Brake: Warner HD
Discharge Systems: Side and Mulch
Engine: Kawasaki OHV (15 & 17 HP)
Hour meter: Included
Transmission: Peerless 5 speed w/ reverse
Fuel Capacity: 6 Gal.
Drive Tires: 16x4.0-8 (32") 18x6.5-8 (36" & 48")
Caster Tires: 9x3.50-4
Speed Forward: 4.5 mph
Speed Reverse: 1.3 mph
Overall length: 72" (32") 76" (36") 69" (48")
Dry Weight: (lbs.) 415 (32") 425 (36") 435 (48")
ZERO TURN WALK-BEHIND
Quad-Lever or Pistol-Grip Controls
Cutting widths: 32", 36", 48", 52"
Fixed Deck: Mowing height 1.5" - 4.25" Adjusted with shims
Deck Construction: 7 Gauge Steel (heavy duty commercial fabrication)
Blade Tip Speed: (at 3584 engine rpms) 19,000 feet/minute
Spindles: Cast Iron with 1" shaft and sealed ball bearings
Blade Clutch/Brake: Warner maintenance free heavy duty
Engine: Kawasaki OHV (15, 17, 19 HP)
Hour meter: Included - Dash mounted
Hydro Pumps: 10cc Hydrogear
Hydro Motors: Ross
Fuel Capacity: 6.4 Gals.
Speed Forward: 6.5 mph (32"cut) 7.2 mph (36", 48", 52"cut)
Speed Reverse: 3.9 mph (32"cut) 4.3 mph (36", 48", 52"cut)
Drive Tires: 16x4.0-8 (32"cut) 18x6.5-8 (36", 48"cut) 18x8.5-10 ( 52"cut)
Overall Length: Pistol Grip 72" (32" cut) 74" (36" cut) 69" (48" cut) 71.5" (52" cut)
Overall Length: Quad Level 72" (32" cut) 76" (36" cut) 69" (48" cut) 71.5" (52" cut)
Dry Weight: Pistol 520 lbs (32" cut) 545 lbs (36" cut) 555 lbs (48" cut) 575 lbs (52" cut)
Dry Weight: Quad Level 540 lbs (32" cut) 560 lbs (36" cut) 640 lbs (48" cut) 650lbs (52"cut)
Discharge Systems: Side, Rear, Mulch
ZERO
TURN STAND-ON RIDER
Quad-Level Controls
Side & Mulch or Rear Discharge Decks
SMALL FRAME
Cutting widths: 32", 36",42", 48"
Fixed Deck: Mowing height 1.75" - 4.5" Adjusted with shims
Deck Construction: 7 Gauge Steel (heavy duty commercial fabrication)
Blade Tip Speed (at 3584 engine rpms): 19,000 feet/minute
Spindles: Cast Iron with 1" shaft with sealed ball bearings
Blade Clutch/Brake: Warner maintenance free heavy duty
Engine: Kawasaki OHV (15, 17, 19 HP twin cylinder)
Hour meter: Included - Dash mounted
Hydro Pumps: 10cc Hydrogear
Hydro Motors: Ross
Fuel Capacity: 5.2 Gal. (32") 6.4 Gal. (36", 42". 48")
Speed Forward: 7.5 mph (32")
Speed Reverse: 4.3 mph
Drive Tires: 18x6.5-8 (32") 18x8.5-8 (36", 42", 48"
Overall Length: 58" (32" cut) 60" (36" cut) 63" (42" cut) 55" (48" cut)
Overall Width {deflector up/ deflector down (in.)}: 33.5/ 43.5 (32" cut) 36.5/ 46.5 (36" cut) 42.5/ 52.5 (42" cut)
49/ 59 (48" cut)
Dry Weight: 605lbs (32" cut) 620lbs (36" ) 630 (42" cut) 660 lbs (48" cut)
ZERO TURN STAND-ON RIDER
Quad-Level Controls
Side, & Mulch, or Rear Discharge Decks
RAPID HEIGHT DECK LIFT
Cutting widths: 36", 42" 48", 52"
Cutting heights: 1.0 to 5.0 inches
Deck height control: Rapid-Hite™
Deck Construction: 7 Gauge Steel (H.D. commercial construction)
Blades: 1/4" thick high lift 2 - 18" (36") 2 - 21" (42") 3 - 16.5" (48") 3 - 18" (52" cut)
Blade Tip Speed (at 3584 rpms): 19,000 ft./min.
Spindles: Cast iron with 1" shaft with precision ball bearings
Blade Clutch/Brake: Warner maintenance free H.D.
Engine: Kawasaki OHV 17 & 19 twin cylinder
Horsepower: 17 & 19 HP (36" & 42") 19 HP (48" & 52" cut)
Hour meter: Included - Dash mounted
Hydro Pumps: 10cc
Fuel Capacity: 6.4 gal.
Drive Tires: 18 X 8 - 10
Speed Forward: 7.5 mph
Speed Reverse: 4.3 mph
Overall Length: 63" (36" cut) 66" (42" cut) 58.5" (48" cut) 59.5" (52" cut)
Overall Width {defector up/defector down (in.)}: 36.5/ 46.5 (36") 42.5/ 52.5 (42") 49/ 59 (48")
53/ 64 52")
Dry Weight: 710lbs (36" cut) 720lbs (42" cut) 750lbs (48" cut) 790lbs (52")
ZERO TURN STAND-ON RIDER
Quad-Level Controls
Side & Mulch or Rear Discharge
LARGE FRAME
Cutting widths: 48", 52", 61"
Cutting heights: 1.75 to 4.5 inches
Deck height control: Fixed deck, mowing height adjusted with shims
Deck Construction: 7 Gauge Steel (H.D. commercial construction)
Blades: 1/4" thick high lift 3 - 16.5" (48") 3 - 18" (52" cut) 3 - 21" 61" cut)
Blade Tip Speed (at 3584 rpms): 19,000 ft./min.
Spindles: Cast iron with 1" shaft with precision ball bearings
Blade Clutch/Brake: Warner maintenance free H.D.
Engine: Kawasaki OHV 17, 19, 23 & 25 HP twin cylinder
Horsepower: 17, 19 & 23 HP (48") 17, 19, 23, & 25 HP (52" cut) 23 & 25 HP (61" cut)
( 23 & 25 HP equipped with heavy duty air cleaner)
Hour meter: Included - Dash mounted
Hydro Pumps: 10cc
Fuel Capacity: 6.4 gal.
Drive Tires: 20 X 10 - 8
Caster Tires: 11 X 4.0 - 5
Speed Forward: 8.4 mph
Speed Reverse: 4.3 mph
Overall Length: 55" (48" cut) 56.5" (52" cut) 60" (61" cut) 59.5"
Overall Width {defector up/defector down (in.)}: 49/ 59 (48") 53/ 63 (52") 62/ 72 (61")
Dry Weight: 765 lbs (48" cut) 785 lbs (52" cut) 835 lbs (61" cut)
ZERO
TURN SIT-ON / STAND-ON RIDER
Quad-Level Controls
Side & Mulch or Rear Discharge Decks
Cutting widths: 48", 52", 61"
Fixed Deck: Mowing height 1.0" - 5.25" Rapid-Hite™ height adjustment
Deck Construction: 7 Gauge Steel (heavy duty commercial fabrication)
Blade Tip Speed (at 3600 engine rpms): 19,084 feet/minute
Spindles: Cast Iron with 1" shaft with sealed ball bearings
Blade Clutch/Brake: Warner maintenance free heavy duty
Engine: Kawasaki OHV (19 or 23 hp on 48") (23 or 25 hp on 52" and 61")
Hour meter: Standard
Amp meter: Standard
Hydro Pumps: 16cc Hydrogear
Hydro Motors: Hydrogear
Fuel Capacity: 10.7 gals.
Speed Forward: 11 mph
Speed Reverse: 5 mph
Drive Tires: 23x9.50-12
Front Caster Tires: 13 X 5 - 6
Overall Length: 65" (48" cut) 65" (52" cut) 70" (61" cut)
Overall Width {deflector up/deflector down (in.)} 49/59 (48" cut) 53/63 (52" cut)
62/72 (61" cut)
Dry Weight: all three units 905 - 950 lbs.
SENTAR SPORT STAND -ON or SIT DOWN
Quad Lever Controls RIDER
Side & Mulch or Rear Discharge Decks
Cutting widths: 36", 42", 48", & 52"
Fixed Deck: Mowing height 1.0" - 5.0" Rapid-Hite™ height adjustment
Deck Construction: 7 Gauge Steel (heavy duty commercial fabrication)
Blade Tip Speed (at 3584 engine rpms): 19,000 feet/minute
Spindles: Cast Iron with 1" shaft with sealed ball bearings
Blade Clutch/Brake: Warner maintenance free heavy duty
Engine: Kawasaki OHV Twin cylinder 17 & 19 HP
Hour meter: Standard
Hydro Pumps: 10cc Hydrogear
Hydro Motors: Ross
Fuel Capacity: 6.4 gals.
Speed Forward: 7.5 mph
Speed Reverse: 4.3 mph
Drive Tires: 18 X 8 - 10
Front Caster Tires: 11 X 4 - 5
Overall Length 63" (36") 66" (42") 58.5" (48') 59.5" (52")
Overall Width: {deflector up/deflector down (in.)} 37/ 48 (36") 42.5/ 52.5 (42") 49/ 59 (48")
53/ 64 (52")
Dry Weight: 710lbs (36") 720lbs (42") 750lbs (48") 790 (52")
MID-MOUNT Z Innovative Z with great features
Cutting widths: 48" 52" & 61"
Deck lifts system: Foot Operated
Cutting height: 1.5" to 5.5"
Deck Construction: 7 Gauge Steel
Blade Tip Speed (at 3584 engine rpms): 19,000 ft./min.
Spindles: Cast Iron with 1" shaft with sealed ball bearings
Blade Clutch/Brake: Warner maintenance heavy duty.
Discharge: Side, Rear & Mulch
Engine: Kawasaki twin cylinder OHV
Engine Starting: Electric
Hour Meter: Standard (quartz)
Operator Controls: Over the lap levers™
Hydro Pumps: 16 cc
Fuel Capacity: 15 gals.
Drive Tires: 23 X 9.5 - 12 (48" & 52") 24 X 12.0 - 12 (61")
Front Caster Tires: 13 X 5.0 - 6
Speeds Forward/Reverse (mph): 13 / 7
Overall Length: 78"
Overall Width deflector up/deflector down (in.): 49/59 (48") 53/63 (52") 62/72 (61")
Dry Weight (lbs.): 940 (48") 950 (52") 985 (61")
STANDER ZX
Cutting widths: 52" & 61"
Deck lift system: Hand operated (1/4" increments)
Cutting heights: 1.5" to 5.5"
Deck Construction: 7 Gauge steel 6" deep
Blades: 1/4" thick high-lift (3) 18" for 52" cut (3) 21" for 61" cut
Blade Tip Speed @ 3584 engine rpms: 19,000 feet/minute
Spindles: Cast Iron w/ 1" shaft and precision ball bearings
Blade Clutch: Warner Heavy duty with brake
Discharge System: Side, Mulch & Rear
Engine: Kawasaki OHV Twin with Electric start
Horse Power: 52" cut 27 & 31 61" cut 31 & 37
Hour meter: Included as std. equipment
Operator Controls: Quad Level
Hydro Pumps: 16cc with cooling fans
Fuel Capacity: 17.5 gallons
Drive Tires: 52" cut 23 X 9.5 - 12 61" cut 24 X 12.0 - 12
Caster Tires: 13 X 6.5 - 6
Speed Forward (mph): 13.5 mowing, 15 transport
Speed Reverse (mph): 7
Overall Length: 52" cut 67.5 " 61" cut 69"
Overall Width 52" cut: 53" deflector up, 63" deflector down
Overall Width 61" cut: 62" deflector up, 72" deflector down
Dry Weight 52" cut: 1150 lbs w/ 27 HP & 1200 lbs w/31 HP
Dry Weight 61" cut: TBD
For more information about Wright commercial products visit their web site.
I offer the following special services.
FREE DELIVERY OF ANY NEW UNIT WITHIN 75 MILES OF BINGHAMTON, NY
SPECIAL FINANCING (to qualified buyers): 36 month term @ 3.9%
LOW 6% SALES TAX ON ALL PURCHASES AT MY SHOP
PURCHASE THREE MOWERS AND RECEIVE A 15% DISCOUNT FROM
THE SUGGESTED LIST PRICE.
CALL 570.663.2552